Email: [email protected]  |  Call: +91-9619369868

Alloy Steel A182 F9 Forged Fittings

Home Alloy Steel A182 F9 Forged Fittings

Alloy Steel A182 F9 Forged Fittings

Leading Manufacturer & Supplier of A182 F9 Alloy Steel Forged Fittings, Alloy Steel F9 Threaded Forged Tee, ASTM A182 Alloy Steel F9 Elbow, Alloy Steel F9 Forged Threaded Fittings, F9 Chrome Moly Threaded Forged Pipe End Cap Manufacturer and Suppliers in Mumbai, India

Alloy Steel F9 Threaded Weld Cross, Alloy Steel F9 Forged Socket Weld Fittings, Chrome Moly F9 Forged Threaded 90 Deg. Elbows, Alloy Steel F9 Threaded Coupling, Alloy Steel F9 Forged Bushing, Alloy Steel F9 Forged Hex Plug, Grade F9 Alloy Forged Cross Exporters

Aspirinox Alloys Inc. is an industry expert in producing Alloy Steel A182 F9 Forged Fittings. These fittings are used in places where there is more exposure to chlorine. AS A182 F9 Forged Fittings are known for high-density steel and high resistance to corrosion. They are used in commercial kitchens and food processing plants.

 

Alloy Steel A182 F9 Forged Socket Weld Fitting is used in hard and highly tempered conditions because of its easy installation and maintenance. Alloy Steel A182 F9 Threaded Fittings are used in everyday activities where it gets in contact with water or chemicals as it is resistant to corrosion. Since pipes fittings carry high-pressure liquids and gases, they have to be built with close tolerances.

 

The synthesis of Alloy Steel A182 F9 Forged Tees doesn’t require surface finishes and can be steam cleaned and sterilized. The Pipe Tees are short pipes with a 90 degrees branch that helps in collecting and distributing the flow. Alloy Steel A182 F9 Forged Cross is used in pump shafts, valve components, and automatic machine parts. These crosses act as a four-way linkage system in piping connects and combine or divide the flow. Alloy Steel A182 F9 Forged Unions doesn’t corrode or rust. They are extremely essential to make the operation of the pipes essential by providing a means to flexibly connect or disconnect the pipes when required.

 

Alloy Steel A182 F9 Forged Nipples are designed to bear different loads in stores and warehouses as they are torsion-resistant. Alloy Steel A182 F9 Forged Elbow Fittings is different than carbon steel where it corrodes quickly when getting in contact with air and moisture. The Elbows are further available in short radius and long radius to accommodate different flow pressures and ensure less loss of pressure. All the A182 F9 Alloy Steel Forged Fittings are manufactured and designed according to the international standard. To get the best deals on all types of alloy steel fittings, contact us today.

ASME 16.11 F9 Chrome Moly Threaded Fittings, Alloy Steel F9 Threaded Forged Union, Chrome Moly F9 Threaded Forged Equal Tee, ASME SA182 Chrome Moly F9 Lateral Tee, Alloy Steel F9 Forged 90 Deg Elbow, Alloy Steel F9 Forged Pipe Nipple, Alloy Steel F9 Forged Boss Fittings Supplier in India

Alloy Steel A182 F9 Forged Fittings Specifications

Specifications for Alloy Steel A182 F9 Forged Fittings. If any specification is not mentioned here, please use the contact button for quick quote.

Specifications ASTM A182 / ASME SA182
Standards ANSI/ASME B16.11 & BS3799, etc.
Size 1/2″NB TO 48″NB in Sch 10s, 40s, 80s, 160s, XXS.
Class 2000#, 3000#, 6000#, 9000#
Type Socket Weld Fittings, Screwed-Threaded Fittings

Types of Alloy Steel A182 F9 Forged Threaded Fittings

  • Alloy Steel A182 F9 Forged Threaded Elbow
  • Alloy F9 45 Degree Forged Threaded Elbow
  • A182 F9 90 Degree Forged Threaded Elbow
  • Alloy Steel F9 Forged Threaded Equal Tee
  • Alloy Steel A182 F9 Forged Threaded Unequal Tee
  • Alloy A182 F9 Forged Threaded Equal Cross
  • Alloy Steel F9 Forged Threaded Unequal Cross
  • Alloy Steel A182 F9 Forged Threaded Half Couplings

  • Alloy Steel F9 Forged Threaded Reducing Couplings
  • Alloy Steel A182 F9 Forged Threaded Cap
  • Alloy F9 Forged Threaded Reducing Insert
  • Alloy Steel F9 Forged Threaded Bushing
  • Alloy Steel A182 F9 Forged Threaded Pipe Nipples
  • Alloy Steel F9 Forged Threaded Hex Nipples
  • Alloy Steel A182 F9 Forged Threaded Plug
  • Alloy A182 F9 Forged Threaded Unions

Alloy Steel A182 F9 Steel Forged Fittings Chemical Composition

Grade Alloy F9
C 0.15 max
Mn 0.3 – 0.6
Si 0.5 – 1
S 0.03
P 0.03
Cr 8 – 10
Mo 0.9 – 1.1

Mechanical Properties of Alloy Steel A182 F9 Forged Fittings

Grade A182 F9
Tensile Strength 380
Yield Strength (0.2%Offset) 585
Elongation 20

Types of Alloy Steel A182 F9 Forged Socket Weld Fittings

  • Alloy Steel A182 F9 Forged Socket Weld Elbow
  • Alloy A182 F9 Forged Socket Weld Equal Tee
  • Alloy F9 Forged Socket Weld Unequal Tee
  • Alloy Steel F9 Forged Socket Weld Equal Cross
  • Alloy A182 F9 Forged Socket Weld Unequal Cross
  • Alloy Steel A182 F9 Forged 45 Degree Elbow
  • Alloy Steel A182 F9 Forged Pipe Tee
  • Alloy Steel A182 F9 Forged Reducing Tee
  • A182 Alloy Steel F9 Forged Pipe Cross
  • Alloy Steel A182 F9 Forged Reducing Cross Fittings
  • Alloy Steel A182 F9 Forged Pipe Plug
  • A182 Alloy Steel F9 Forged Threaded Full Couplings

  • Alloy F9 Forged Socket Weld Half Couplings
  • Alloy Steel A182 F9 Forged Socket Weld Full Couplings
  • Alloy A182 F9 Forged Socket Weld Reducing Couplings
  • Alloy Steel A182 F9 Forged Socket Weld Cap
  • Alloy Steel F9 Forged Socket Weld Reducing Insert
  • Alloy Steel A182 F9 Forged Half Couplings
  • Alloy Steel A182 F9 Forged Full Coupling
  • Alloy A182 F9 Forged Union Fitting
  • Alloy Steel A182 F9 Forged Pipe End Cap
  • Alloy Steel F9 Forged Reducing Insert Fitting
  • A182 Alloy Steel F9 Forged Hex Plug

Alloy Steel A182 F9 Forged Fittings Updated Price List

Request the latest Alloy Steel A182 F9 Forged Fittings List. Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement. Aspirinox Alloys INC maintains a stock of all standard items and can export them at best price for Alloy Steel A182 F9 Forged Fittings.

Alloy Steel A182 F9 Forged Fittings Value Added Services

Material Testing:

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test

Documentation & Packaging:

  • Commercial Invoice including HS Code
  • Packing List including Complete Details
  • Certificate of Origin legalized
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Material Test Certificates (MTC)
  • Guarantee Letter
  • NABL approved Laboratory Test Reports

Exporting Alloy Steel A182 F9 Forged Fittings to Below Countries

Afghanistan, Albania, Andorra, Austria, Bahrain, Bangladesh, Bhutan, Brunei, Belarus, Belgium, Bulgaria, Cambodia, China, Cyprus, Croatia, Czech Republic, Denmark, Estonia, Egypt, Finland, France, Germany, Greece, Georgia, Hungary, Iceland, Ireland, Italy, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Lebanon, Latvia, Latin America, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Malaysia, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Netherlands, Norway, Oman, Poland, Portugal, Pakistan, Palestine, Philippines, Qatar, Russia, Romania, Russia, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Spain, Sweden, Switzerland, Saudi Arabia, Singapore, South Korea, South Africa, Sri Lanka, Syria, Taiwan, Tanzania, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine, United Kingdom, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen

Supplying Alloy Steel A182 F9 Forged Fittings to Following Domestic Cities

Mumbai, Delhi, Kolkata, Chennai, Bengaluru, Hyderabad, Ahmadabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Srinagar, Jabalpur, Asansol, Vasai Virar City, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Ranchi, Raipur, Kollam, Gwalior, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota

Industries & Applications Where Our Alloy Steel A182 F9 Forged Fittings Are Used

Chemicals, Petrochemicals, Oil & Natural Gas Organization, Fats, Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Automation, Paints, Steel Industries, etc.